Do you use Glazy.org to store/share your glaze recipes? If you’re just hearing about Glazy for the first time, you should definitely go check it out. It’s a ceramics recipe website that allows you to store recipes with photos, share them with the community and analyze the chemistry/UMF of your glazes, all in one place.
When you start looking for glaze recipes and have a limited number of materials on hand, you may find that you have almost (but not quite) all the materials for a million glaze recipes, but you can’t find a recipe that only uses the materials you currently have.
I find ceramic glazes to be absolutely fascinating. I had no idea when I started working with clay that glazes would become the main focus of my life. Glazing was always an afterthought and I basically ruined most of my pieces by glazing them…
If you’ve been glazing for any length of time, you may have heard about the importance of measuring the specific gravity of your glazes and you may have found yourself wondering: “If it’s so important to measure specific gravity, why aren’t specific gravity values published on glaze recipes?”
Have you been looking for new glazes to add to your glaze palette? If so, I have 99 different cone 6 glazes you can try. That probably sounds like a lot to look through, but it’s really just 9 base glaze recipes plus 10 colour variations each.
This post will give you an idea about the differences between commercial glazes and mixing your own from cratch.
Does any of this sound familiar? You unload a piece from the kiln and the glaze turned out perfectly! So you glaze more pieces with the same glaze combination, fire them, and they turn out completely different… OR… You mix a small test batch of a glaze and LOVE how it looks…
If you’ve never used Glazy.org before, this is a helpful tutorial to get started. In this tutorial, I go over the basics of using the site.
In this tutorial, I go over how to add colourants to a recipe and keep the colourants separate from the base recipe so your base adds up to 100% and your colourants are shown as additions.
In this tutorial, I show you how to use Glazy to make material substitutions using the UMF (Unity Molecular Formula).
